With the One Ton Garage rear camber shims, you can now get the coveted JDM VIP style look of negative camber on the rear of your Scion xA or xB. The camber shims will allow you to run extra wide, and low-offset wheels by bringing the top of the wheels and tires in under the fenders. They also kick out the bottom of the wheels and tires, giving your car a wider, lower stance which is especially noticable when your car is viewed from behind. These shims are a prerequisite if you are trying to get wheels as flush as possible to your rear fenders.

Until now, the downside of adding negative camber to the Scion's rear beam suspension has been, as you increase negative camber, the toe alignment is adversely affected. And additional negative camber coupled with a Scion that is lowered will lead to a very unfavorable toe-in condition that will cause erratic handling and accelerated tire wear. But unlike other rear camber shims out there, the One Ton Garage rear camber shims have a unique toe correction feature that is meant to alleviate the toe-in problem, giving you a much improved ride and tire life. An added benefit of the One Ton Garage camber shims over other shims is that you don't have to wait to import them from Japan. They are available now!

If you have higher-offset wheels on your Scion, it is not recommended to run the camber shims alone, as they will bring the inside top edge of your wheel and tire in, potentially causing an interference issue with the rear shocks, and/or the inner fenderwell. But for those of you who have wheels with fitments that fall into the ranges listed in the following table (or even if they aren't on the table, but you just want to flush the wheels out some more in addition to getting more negative camber), you can now purchase the camber/spacer shim combo set. The camber shims have been designed to be stackable with the One Ton Garage spacer shims, and both are now available together as a combo kit with all the necessary hardware to still make installation a breeze.

If your rear wheels are the following width and offset, you will need to purchase the camber/spacer combo kit.

Width	Offset
6.5"	54mm or more
7.0"	48mm or more
7.5"	42mm or more
8.0"	36mm or more
8.5"	30mm or more
9.0"	24mm or more

The rear camber shim kit and camber/spacer combo kit include everything needed for a true bolt-on installation. Assembly is straigtforward and requires only common hand tools, and can be performed by novice, or first-time mechanics. Click on the link to the left to the installation manual to get an idea of what is involved.

Pricing is $175.00 for each camber shim kit. The camber/spacer combo kit is $230.00 for each camber/spacer combo kit, and both prices includeFREE shipping. If you are interested in purchasing a kit, please email: van@onetongarage.com

 

Copyright © 2005-2007 One Ton Garage. All rights reserved.